1-DRİLLS

 a) Water cooled diamond drills

 The Standard programme for diamond drills begins at 12mm and ends at 1500mm.Almost all intermediate sizes can be supplied. The Standard length is 400mm. If required other sizes can be manufactured (maximum 6.00 metre). Up to  50 mm all drills are fitted with a crown.

Above this segments, size 24 mm in length and 9 mm high are Standard. The thickness of the segment can vary between 2 to 8 mm depending on the thickness of the drilling tube and the available power of the drilling motor. The most commonly employed segment thicknesses  for thick-walled drills vary from 3 to 5 mm and for thin-walled drills this is 2.5 mm. Thin-walled drills are intended for use with ‘light’ drilling motors.

 b) Dry- sawing, drilling and grindings discs

 Large range of diamond tools for universal and specialist use.

 Dry-sawing: ın order to meet the increasingly high demands in the areas of sawing speed, lifetime and safety, a new range of diamond tools has been developed that will eclipse puts all other production methods.

 These products are faster, safer and have a longer lifetime.

The unique design of the blade and the use of lighweight steel reduces friction and thereby gives a 20-30% beter cutting result.

 Applications are : Natural and artificial stone. Fire prof materials.Thin sheet steel. Glass. Concrete(also reinforced).Tiles.PVC.

 There are 2 types of tools.

 1)      type SC – for both dry and wet use

 2)      type SD – for dry use

 Instructions for use:

Check rotation direction (given on the blade).

Check axle hole fits.